;
    • Thiết bị wifi OAW-AP1201-RW OmniAccess Stellar AP1201
    • Thiết bị wifi OAW-AP1201-RW OmniAccess Stellar AP1201
    • Thiết bị wifi OAW-AP1201-RW OmniAccess Stellar AP1201

    Thiết bị wifi OAW-AP1201-RW OmniAccess Stellar AP1201

    0đ
    Đặc điểm nổi bật
    OmniAccess Stellar AP1201.
    - Dual radio 2x2:2 802.11a/b/g/n/ac MU-MIMO AP, integrated antenna,
    - 1 Port GbE, integrated BLE,
    - 1 Port 48V DC power interface,
    - 1 Port Console.
    - Unrestricted Regulatory Domain. MUST NOT be used for US, Japan, Israel or Egypt.
  • Cam kết
    giá tốt nhất

  • Nhận đổi trả
    trong 30 ngày

  • Giao hàng
    toàn quốc

  • Thanh toán
    khi nhận hàng

  • OmniAccess Stellar AP1201 (OAW-AP1201-RW)
    Alcatel-Lucent OmniAccess Stellar AP1201 Indoor Entry range Enterprise 802.11ac MU-MIMO AP
    ● Dual-Radio, 11n 2x2:2 + 11ac 2x2:2
    ● 1x GbE, BLE radio
    ● 1x Console
    ● integrated antennas.
     
    Radio specification  +  AP type: Indoor, dual radio, 5 GHz 802.11ac 2x2:2 MU-MIMO and  2.4 GHz 802.11n 2x2:2 MIMO
     +  5 GHz: Two spatial stream single user (SU) /multi user (MU) MIMO for up to 867 Mb/s wireless data rate
     +  2.4 GHz: Two spatial stream single user (SU) MIMO for up to 400 Mb/s wireless data rate to individual 2x2 VHT40 client devices (300 Mb/s for HT40 802.11n client devices)
    Interfaces   +  1× 10/100/1000Base-T autosensing (RJ-45) port, Power over Ethernet (PoE)
     +  1x Bluetooth Low Energy (BLE) 5.0 radio, integrated antenna. Hardware ready for Zigbee.
     +  1× management console port (RJ-45)
     +  Reset button: Factory reset
     +  Kensington security slot
    Antenna  +  AP1201: Built-in 2×2:2 @ 2.4 GHz, 2x2:2 @ 5 GHz, BLE antenna
     +  Integrated dual-band down tilt omni- directional antennas for 2x2 MIMO with maximum antenna gain of 4.7 dBi in  2.4 GHz and 4.6 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP.
     +  Integrated BLE antenna with peak gain 3.7dBi
    Power  +  Supports direct DC power and  Power over Ethernet (PoE)
     +  When both power sources are available, DC power takes priority over PoE
     - Direct DC source:
     +  48 V DC nominal, ± 5%
     +  Power over Ethernet (PoE):
     +  IEEE 802.3af/at compliant source
     -  Maximum (worst case) power consumption:
     +  11 W (PoE or DC)
     +  4.1 W in idle mode
    Mounting  +  The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16- inch flat T-bar drop-tile ceiling.
     +  Optional mount kits for Open Silhouette and Flanged Interlude.
     +  Optional mount kits for flat-surface (wall).
    Environmental  - Operating:
     +  Temperature: 0° C to 45° C  (+32° F to +113° F)
     +  Humidity: 5% to 95%  non-condensing
     - Storage and transportation:
     +  Temperature: -40° C to +70° C (-40° F to +158° F)
    Dimensions/Weight  - Single AP excluding packing box and accessories:
     +  155 mm (W) x 155 mm (D) x  28 mm (H) -6.10” (W) x 6.10” (D) x 1.10” (H)
     +  310 g/0.68 lb
     - Single AP including packing box and accessories:
     +  185 mm (W) x 172 mm (D) x  57 mm (H) -7.28” (W) x 6.77” (D) x 2.24”(H)
     +  500 g/1.10 lb
    IEEE standard
     +  IEEE 802.11a/b/g/n/ac Wave 2
     +  IEEE 802.11e WMM
     +  IEEE 802.11h, 802.11i, 802.11e QoS IEEE 802.1Q (VLAN tagging)
     +  802.11k Radio Resource Management
     +  802.11v BSS Transition Management
     +  802.11r Fast Roaming
     +  802.11w Protected Management Frame
     
    Loading